1.1 This specification covers nickel (UNS N02200)* and low-carbon nickel (UNS N02201)* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.
1.1.1 Hot-worked material is available. Properties are to be agreed upon between the manufacturer and purchaser.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations.
TABLE 1 Mechanical Properties
| Condition and Size | Tensile Strength, min, psi (MPa) | Yield Strength (0.2 % offset), min, psi (MPa) | Elongation in 2 in. or 50 mm (or 4 D), min, % |
|||
|---|---|---|---|---|---|---|
| Nickel (UNS N02200) | Low-Carbon Nickel (UNS N02201) |
Nickel (UNS N02200) | Low-Carbon Nickel (UNS N02201) |
Nickel (UNS N02200) |
Low-Carbon Nickel (UNS N02201) |
|
| Annealed: | ||||||
| 5 in. (127 mm) and under outside diameter |
55 000 (380) | 50 000 (345) | 15 000 (105) | 12 000 (80) | 35 | 35 |
| Over 5 in. (127 mm) in outside diameter |
55 000 (380) | 50 000 (345) | 12 000 (80) | 10 000 (70) | 40 | 40 |
| Stress-Relieved: | ||||||
| All sizes | 65 000 (450) | 60 000 (415) | 40 000 (275) | 30 000 (205) | 15 | 15 |
Product Details
- Published:
- 11/01/2005
- Number of Pages:
- 4
- File Size:
- 1 file , 77 KB
- Redline File Size:
- 2 files , 150 KB
