Click here to purchase
This Practice provides requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or greater used for general water services.

Comment: General water services include condensate, cooling water, demineralized water, utility water, produced water, treated water, etc.

This Practice covers pumps with service conditions within the following limits:
a. Maximum discharge pressure 35 Barg (500 psig)
b. Minimum pumping temperature 0°C (32°F)
c. Maximum pumping temperature 150°C (300°F)
d. Maximum rotational speed 3,600 rpm

Comment: For services within the capabilities of ANSI/ASME pumps, use PIP RESP73H.

Pump types covered by this Practice are broadly classified as overhung or between-bearings. The following pump types are not included in the scope of this Practice:
a. Close coupled (i.e., impeller mounted on the motor shaft)
b. Two-stage overhung
c. Double suction overhung

Fire water pumps are covered by NFPA 20 and are not covered by this Practice.

Product Details

Published:
01/01/2020
Number of Pages:
31
File Size:
1 file , 620 KB

Click here to purchase
This Practice provides the supplier with requirements for design and manufacture of horizontal centrifugal pumps that are used for water services. Water services include condensate, cooling water, demineralized water, utility water, produced water, treated water, fire water, etc. This Practice includes manufacturing and performance requirements for horizontal centrifugal pumps and their accessories. Pump types covered by this Practice are broadly classified as overhung or between-bearings.

The following pump types are not included in the scope of this Practice:(a) close coupled (impeller mounted on the motor shaft), (b) two-stage overhung, and (c) double suction overhung.

Pumps with service conditions within these limits are covered by this Practice: (a) maximum discharge pressure, 3,500 kPa (500 psig); (b) minimum pumping temperature, 0°C (32°F); (c) maximum pumping temperature, 150°C (300°F); and (d) maximum rotational speed, 3,600 rpm.

For services outside these conditions and those that fall within the capabilities of ANSI/ASME pumps, it is recommended that PIP RESP73H be used for purchase of pumps.

Product Details

Published:
02/01/2004
File Size:
1 file , 190 KB

Click here to purchase
This Practice provides the supplier with requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or larger that are used for water services.

This Practice covers manufacturing and performance requirements for horizontal centrifugal pumps and their accessories.

Fire water pumps are covered by NFPA 20 and are not covered by this Practice.

Product Details

Published:
12/01/2010
Number of Pages:
32
File Size:
1 file , 460 KB

Click here to purchase
This Practice provides the supplier with requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or larger that are used for water services.

This Practice covers manufacturing and performance requirements for horizontal centrifugal pumps and their accessories.

Fire water pumps are covered by NFPA 20 and are not covered by this Practice.

Product Details

Published:
10/01/2013
Number of Pages:
32
File Size:
1 file , 680 KB

Click here to purchase
This Practice provides the supplier with requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or larger that are used for water services.

This Practice covers manufacturing and performance requirements for horizontal centrifugal pumps and their accessories.

Fire water pumps are covered by NFPA 20 and are not covered by this Practice

Product Details

Published:
02/01/2010
Number of Pages:
28
File Size:
1 file , 300 KB

Click here to purchase
This Practice provides the supplier with requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or larger that are used for water services.

This Practice covers manufacturing and performance requirements for horizontal centrifugal pumps and their accessories.

Fire water pumps are covered by NFPA 20 and are not covered by this Practice

Product Details

Published:
10/01/2010
Number of Pages:
32
File Size:
1 file , 450 KB

Click here to purchase
This Practice provides requirements for design and manufacture of horizontal centrifugal pumps of 150 kW (200 HP) or greater used for general water services.Comment: General water services include condensate, cooling water, demineralized water, utility water, produced water, treated water, etc.

This Practice covers pumps with service conditions within the following limits:

a. Maximum discharge pressure 35 Barg (500 psig)
b. Minimum pumping temperature 0°C (32°F)
c. Maximum pumping temperature 150°C (300°F)
d. Maximum rotational speed 3,600 rpm

Comment: For services within the capabilities of ANSI/ASME pumps, use PIP RESP73H.

Pump types covered by this Practice are broadly classified as overhung or between-bearings.

The following pump types are not included in the scope of this Practice:

a. Close coupled (i.e., impeller mounted on the motor shaft)
b. Two-stage overhung
c. Double suction overhung

Fire water pumps are covered by NFPA 20 and are not covered by this Practice.

This Practice includes 2 data forms.

Product Details

Published:
09/01/2018
Number of Pages:
30
File Size:
1 file , 570 KB

You may also like...