Click here to purchase

1.1 This specification establishes the requirements for heat exchanger tubes manufactured from forge-welded copper and copper alloy tubing in straight lengths on which the external or internal surface, or both, has been modified by cold forming process to produce an integral enhanced surface for improved heat transfer.

1.2 UnitsThe values stated in either inch-pounds units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems could result in nonconformance with the specification.

1.3 The tubes are typically used in surface condensers, evaporators, and heat exchangers.

1.4 The product shall be produced of the following coppers or copper alloys, as specified in the ordering information.

Copper or Copper Alloy
UNS No.
Type of Metal
C12000A DLP Phosphorized, low residual phosphorus
C12200A DHP Phosphorized, high residual phosphorus
C19200 Phosphorized, 1 % iron
C23000 Red Brass
C44300 Admiralty, arsenical
C44400 Admiralty, antimonial
C44500 Admiralty, phosphorized
C68700 Aluminum Brass
C70400 95-5 Copper-Nickel
C70600 90-10 Copper-Nickel
C70620 90-10 Copper-Nickel (Modified for Welding)
C71000 80-20 Copper-Nickel
C71500 70-30 Copper-Nickel
C71520 70-30 Copper-Nickel (Modified for Welding)
C72200 Copper-Nickel

A Copper UNS Nos. C12000, and C12200 are classified in Classification B 224.

Note 1 – Designations listed in Classification B 224.

1.5 The following safety hazard caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ^REFERENCE:

ASTM Standards:

B 153 Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

B 154 Test Method for Mercurous Nitrate Test for Copper Alloys

B 224 Classification of Coppers

B 543 Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

B 601 Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

B 846 Terminology for Copper and Copper Alloys

B 858 Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

E 8 Test Methods for Tension Testing of Metallic Materials

E 29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E 53 Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E 54 Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn)

E 62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E 112 Test Methods for Determining Average Grain Size

E 118 Test Methods for Chemical Analysis of Copper-Chromium Alloys

E 243 Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes

E 255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E 478 Test Methods for Chemical Analysis of Copper Alloys

E 527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

^KEYWORDS: condenser; copper; copper alloys; heat exchanger; integral fins; welded tube; UNS No. C12000; UNS No. C12200; UNS No. C19200; UNS No. C23000; UNS No. C44300; UNS No. C44400; UNS No. C44500; UNS No. C68700; UNS No. C70400; UNS No. C70600; UNS No. C70620; UNS No. C71000; UNS No. C71500; UNS No. C71520; UNS No. C72200 ^DOI: 10.1520/B0956-07E02 ^INDEX TERMS: Condenser and heat exchanger systems–copper/copper alloy; Copper; Copper alloy; Integral fins ^STATUS: ^APPROVAL: 20071001 ^PAGES: 9 ^COMMITTEE: B05 ^SUBCOMMITTEE: 0400 ^BOS: 02.01 ^ORGINFO: none ^ACTION: EPSILON_EDIT ^MISCPUB: ^PDESIG: B0956 ^PYEAR: 2007E02 ^CLASS: Specification

Product Details

Published:
10/01/2007
Number of Pages:
9
File Size:
1 file , 160 KB