Click here to purchase
Preface:
This is the second edition of CAN/CSA-C22.2 No. 60079-31, Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure “t”, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60079-31 (second edition, 2013-11). It supersedes the previous edition published in 2012 as CAN/CSA-C22.2 No. 60079-31 (adopted IEC 60079-31:2008). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code.
This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
Scope:
This part of IEC 60079 is applicable to electrical equipment protected by enclosure and surface temperature limitation for use in explosive dust atmospheres. It specifies requirements for design, construction and testing of electrical equipment and Ex Components.
This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence.
This standard does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances.
This standard does not apply to electrical equipment or Ex Components intended for use in underground parts of mines as well as those parts of surface installations of such mines endangered by firedamp and/or combustible dust.
This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust.
Consideration of additional protective measures is required where the application of electrical equipment is in atmospheres, which can contain combustible dust as well as explosive gas, whether simultaneously or separately.
Where the electrical equipment has to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional measures can be necessary. The measures used should not adversely affect the integrity of the enclosure.
Product Details
- Edition:
- 2nd
- Published:
- 10/01/2015
- ISBN(s):
- 9781488300455
- Number of Pages:
- 60
- File Size:
- 1 file , 1.1 MB
- Product Code(s):
- 2423913, 2423913, 2423913
