Click here to purchase

Product Details

Published:
03/20/2022
ISBN(s):
9781455929252
ANSI:
ANSI Approved
Number of Pages:
28
Note:
This product is unavailable in Ukraine, Russia, Belarus

Click here to purchase
Provides fire safety requirements for oxy-fuel cutting and welding systems, including but not limited to, cylinder storage and use, acetylene generation, and MAPP gas.

Product Details

Published:
01/01/1997
Number of Pages:
17

Click here to purchase

Reduce the risk of fire and explosion with the 2007 NFPA 51.

Using detailed schematic drawings showing different system layouts, the 2007 NFPA 51 provides the latest fire safety requirements for gas-fueled systems for cutting, welding, and other similar processes.

Industry professionals, design engineers, and code enforcement officials will find up-to-date guidance on:

  • Cylinder storage
  • System manifolding and piping
  • Associated protective equipment such as regulators

Also provided are requirements for the use of acetylene generators, calcium carbide storage for acetylene generators, and mobile acetylene trailer systems.

Product Details

Published:
04/30/2007
Number of Pages:
18

Click here to purchase
Reduce the risk of fire and explosions with the 2013 NFPA 51 governing oxygen-fuel gas systems.

NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes provides the latest fire safety requirements for gas-fueled systems. This 2013 edition was reorganized to coordinate with the maximum allowable quantities per storage area (MAQ) and building controls in NFPA 55: Compressed Gases and Cryogenic Fluids Code, NFPA 1: Fire Code, NFPA 400: Hazardous Materials Code, and NFPA 5000®: Building Construction and Safety Code&reg.

Only the 2013 edition includes:

  • Updated and clarified requirements for oxygen manifolds, including allowable pressures
  • New protocols for mobile acetylene trailer systems coordinate with NFPA 51A: Standard for Acetylene Cylinder Charging Plants

Industry professionals, design engineers, and code enforcement officials need NFPA 51 for the latest guidance on cylinder storage, system manifolding and piping, and associated protective equipment such as regulators. The Standard also includes provisions for the use of acetylene generators, calcium carbide storage for acetylene generators, and mobile acetylene trailer systems.

Product Details

Published:
06/18/2012
ISBN(s):
9781455904440
ANSI:
ANSI Approved

Click here to purchase
Apply the 2018 edition of NFPA 51 to reduce the risk of fire and explosions with requirements governing oxygen-fuel gas systems.

NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes provides the latest fire safety requirements for gas-fueled systems. This document works hand-in-hand with NFPA 1: Fire Code, NFPA 400: Hazardous Materials Code, NFPA 5000®: Building Construction and Safety Code®, and other NFPA® National Fire Codes.

Industry professionals, design engineers, and code enforcement officials need NFPA 51 for the latest guidance on cylinder storage, system manifolding and piping, and associated protective equipment such as regulators. The Standard also includes provisions for the use of acetylene generators, calcium carbide storage for acetylene generators, and mobile acetylene trailer systems.

Changes in the 2018 edition of NFPA 51 improve consistency with the latest edition of NFPA 55.

Updates to information extracted from and references to the 2016 edition of NFPA 55: Compressed Gases and Cryogenic Fluids Code help fill the safety gap with the most comprehensive set of industrial gas requirements in the industry.

Product Details

Published:
08/11/2016
ISBN(s):
9781455916047
ANSI:
ANSI Approved
Number of Pages:
29