NFPA-FIRE NFPA-FLUID EEMUA UL CTA AWS
NFPA-FIRE NFPA-FLUID EEMUA UL CTA AWS
This interface document SAE J2286 revises the requirements for file formats as were originally described in SAE J1924. This document describes Interface 1 (I/F 1) in SAE J2461. This document does not imply the use of a specific hardware interface, but may be used with other hardware interfaces such as SAE J1939, ISO 15765 or ISO 14229. The requirements of SAE J2286 supersede the requirements defined by SAE J1924.
This interface document SAE J2286 revises the requirements for file formats as were originally described in SAE J1924. This document describes Interface 1 (I/F 1) in SAE J2461. This document does not imply the use of a specific hardware interface, but may be used with other hardware interfaces such as SAE J1939, ISO 15765 or ISO 14229. The requirements of SAE J2286 supersede the requirements defined by SAE J1924.
SAE J2461 establishes the requirements for Interface 1 (I/F 1), as a replacement of the file-based interface described by SAE J1924, as shown by Figure 1. Interface 1 (I/F) is a bi-directional link between the OEM Shop Floor Program (CSCI 1) and the Vendor Component Program (CSCI 2). Using I/F 1, the OEM Shop Floor Program communicates the desired parameters and programming limits for an assembly job to the Vendor Component Program (VCP). In response, the VCP returns programming results to the OEM Shop Floor Program (CSCI 1).
